Vibrating Equipment

Vibratory Furnace Charger

Approx Price: Rs 1 Lakh / Piece(s) 
Minimum Order Quantity: 01 Piece(s)
Vibratory Furnace Charging Unit

Vibratory Furnace Charger consists of a vibrating feeder mounted on a moving trolley with a storage hopper mounted above the feeder. Our company make vibratory furnace chargers basically comprise of the following parts. Vibrating Feeder is suitable for delivering required capacity, storing hopper of required capacity, moving carriage with driving arrangement. Control panel for operating the system. Cable reeling Drum / Cable Drag Chain.

The metallic components like scrap, bales, pig iron and foundry retains are stored in the hopper. The hopper shape is specially designed to enable bulky and irregular scrap pieces to be extracted without problem.

Vibrating furnace charger is effective solutions to problems such as high labor cost, hazards operators faced in foundries, melting shops etc. Such a kind of automation allows foundry men to work at a safe distance thus preventing injuries arising out of molten metal splash. It also facilitates in rapid and quick charging of the furnace thereby allowing maximum utilization of the furnace, in addition to this, the damage to furnace lining is avoided which normally occurs in manual charging of the furnaces.

Ball Vibrators

Approx Price: Rs 8,000 / Piece 
Our Pneumatic Ball vibrator was created by the high centrifugal force produced by a circulating steel ball, which runs on hardened, polished steel races.
Ball vibrator is equipped with steel ring and ball inside .It is tightly sealed by plastic side covers.

The frequency, and hence the centrifugal force, can be continuously regulated via the operating pressure. ball vibrators can be operated using lubrication free compressed air.

Features:
 
  • Low price and durable.
  • Special aluminum alloy, small size, light weight.
  • Fine enclosure protection can be applied in high humidity or dusty working area.
  • Frequency and amplitude of vibration can be adjusted as required.

Applications:

  • Our pneumatic ball vibrators can be
  • used wherever bulk materials need to be moved.
  • The special feature is the simple construction.
  • They serve in the emptying of bunkers, for
  • preventing bridging, rato-holing and adhesion.
  • When used to drive chutes, sieves and
  • vibrating tables, they ensure that the material flow is maintained.

Vibrating Motors

Approx Price: Rs 9,500 / Piece(s) 
MAGWELL Vibration motor excitation force is high efficiency, energy consumption is small, low noise and long life. Vibration motor is power and vibration source of combination of excitation source, vibration motor is installed in the rotor shaft at each end of a group of adjustable eccentric block, using axle and eccentric block high-speed rotating produce centrifugal force get excitation force. It can be applied to general vibratory machines, such as: vibration sieve crusher, extension, vibration falling pressure-blasting machine.

Features / Specifications :

  • The complete stress relieved MS-cast Iron body (Heavy Duty).
  • Winding Class F Insulation type.
  • Power Connection: 3 Ph, 415V, 50Hz. A.C. Supply
  • Standard bearing series are over dimensional in relation to the high speed and stain of strong load to offer increased operational reliability.
  • Drive shaft is made of EN 8 Material of tested quality in order to with stain high torque depending on centrifugal force is achieved.
  • Steel Unbalanced Counter weight fixed at both side of the Motor with the provision for regulation of the oscillation from zero to maximum Vibratory force by easy adjustment
  • Field operation temperature :- Vibratory motor are design to work from -300 to + 500 Temperature continuously at maximum centrifugal force.

Bin Vibrators

Approx Price: Rs 80,000 / Piece(s) 
Our Bin Vibrators, consist of conical shape discharge zone which is connected to storage silo or hopper through a set of steel hangers. The Bin Activator designed by us consists of a conical shape discharge zone that is connected to storage silo or hopper through a set of steel hangers. The gap between the hopper and discharge zone is sealed with the help of a special flexible rubber sleeve. The material is made to flow normally through the opening provided at the discharge point with the help of one Unbalance Vibrator motor that is fixed on one side.

Working Principle:

The gap between the hopper and discharge zone is sealed by one special flexible sleeve made up of rubber. One unbalance vibrator motor is fixed on one side, which when operated makes the material flow normally through the opening, provided at discharge point. Sometimes material stored in hopper does not flow easily due to peculiar design of hopper or due to inherent non flowing properties of the material. In such situation the general solution is to employ bin vibrators, Air jets, Manual pocking or hammering.

Applications:

Bin Activator has tried on all difficult level to handle products like surphur and its compounds, fine mica powder and other minerals, ores titanium dioxide, wood chips, salt, sugar and such other fine, flaky, fibrous and sticky materials.

Electromagnetic Vibrators

Approx Price: Rs 65,000 / Piece(s) 
MAGWELL Electromagnetic vibrators are of a simple design and robust construction to ensure long, trouble-free operation. Most models come standard with totally enclosed. The intensity of vibration is variable over a wide range through a suitable controller which ensures a steady uninterrupted flow of material under varying conditions. Since these vibrators have no rotating or sliding parts, they are virtually maintenance-free.

Vibrators offer an economical means of maintaining the flow of bulk materials from bins, hoppers and chutes. They come with an easily adjustable control, which provides flexibility and assures optimum flow for the type of material being handled. Furthermore, MAGWELL Electromagnetic Vibrators can be operated continuously or intermittently depending upon the specific requirements.

Each Vibrator is supplied with a separate control unit consisting of a switch, fuse, rectifier rheostat. A.C. input to the rectifier is converted to pulsating D.C. which is then supplied to the Vibrator coil thus generating powerful Vibrations at a frequency of 3000 vibrations per minute. The Vibrators are designed for continuous operation.

Features :

  • Wide range of sizes
  • Low noise models availabl
  • Adjustable control
  • Productivity enhanced performance
  • Electromagnetic design
  • Simple design, durable, rugged construction


Applications:


    • The special feature is the simple construction.
    • Our Electromagnetic vibrators can be
    • used wherever bulk materials need to be moved.
    • They serve in the emptying of bunkers, for
    • preventing bridging, rato-holing and adhesion.
    • When used to drive chutes, sieves and
    • vibrating tables, they ensure that the material flow is maintained.

    Vibrating Tables

    Approx Price: Rs 50,000 / Piece(s) 
    Vibrating tables are designed to settle and compact dry bulk materials in various types of containers. Their application provides either a sizable increase in the net weight of the container or reducing in the container size with subsequent savings in shipping and storage space. It is also very effective for handling a wide range of metal parts such as nuts, bolts and rivets.

    Features:

    While using the Vibrating Table you can adjust the vibrating motor’s vibrating force to the platform on the material to achieve the desired form.

    • Good sealing performance, no dust overflow.
    • Continuous production, single or multi-layer, auto-classification filtering.
    • Energy-saving and low noise with vibration motor.
    • Start fast and stop smoothly
    • Simple installation, easy operation and maintenance
    • High power, large platform; maximum power of 7.5kw, exciting force 80KN, sand box can carry the weight of 8T.
    • Table height adjustable, suitable for assembly line use three-dimensional vibration, complex cavity for casting.
    • Variable, modeling process, without damage of the premise, for best compaction results.
    • Since the locking function, the production line to ensure accurate positioning

    Application:


    It is suitable for any dry material screening from 0.74mm-5mm., the largest particle size is 10mm.It is widely used in chemical, food, plastics, pharmaceuticals, metallurgy, glass, building materials, food, fertilizers, abrasives, ceramics and other industries.

    • Food industry: sugar, salt, alkali, gourmet powder, starch, milk powder, yeast powder, pollen, food additive, bean milk, juice, etc.
    • Abrasive material and ceramic industry: building sand, mica, alumina, abrasive, refractory material, slurry, etc.
    • Chemical industry: resin pigment, medicine, grease, paint, palette, etc.
    • Paper-making industry: coated slurry, exhaust liquid, paper making liquid and waste water reclamation, etc.
    • Metallurgy and mining industry: quartz sand, ore, titanium oxide, zinc oxide, etc.
    • Mechanical industry: casting sand, powder metallurgy, electromagnetic material and metal powder, etc.

    Vibrating Equipments

    Approx Price: Rs 1 Lakh / Piece(s) 

    Electro mechanical Vibrating Feeder


    Vibrating Feeder with Unbalanced Motor is available in medium and heavy duty models for conveying bulk materials. The Electromechanical vibrating feeder is used where material is to be fed either continuously or in batches. Offering uninterrupted operation each feeder utilizes the forces set up by two synchronized, counter-rotating, heavy-duty, unbalanced Vibratory Motors, which are firmly fixed to the Feeder trough, in a specific angle to the feeding level. Feeders with unbalanced drives, vibrate freely on a support spring which is insulated against vibration transmission to base frame. This results in a straight line, push-pull, -linear, oscillating motion. The fact that the motors are synchronized and in balance with one another, eliminate the isolation problems normally associated with simple brute force single eccentric drives systems.


    Working principles:

     

    Electromechanical Vibrating Feeders are designed to convey product by creating a linear straight line motion. Two counter-rotating WAGWELL motors provide the linear (push-pull) action required. As the Unbalanced motors counter-rotate, the side forces cancel out and the linear forces are combined. With the motors properly attached and located on a rigid trough suitable for the forces being exerted, and also suspended on isolation springs, the conveyance action is quiet and positive. The synchronized motors provide a semi-balanced design which eliminates the uncontrolled bouncing at shut down. Final motors selected can be either 1800, 1200 or 900 RPM, depending upon amplitude required. Final motor horsepower selected is a function of trough weight and TPH capacity required. All motors are continuous duty rated at maximum force.

     

    Applications:


    • Discharging bulk material from bins
    • Feeding conveyor belts
    • Bucket elevators
    • Feeding crushers
    • Mixers
    • Furnaces and scales
    • Vibratory screens
    • Loading and sorting plants

    Additional Information:
    • Item Code: 000143

    Tublar Feeder

    Approx Price: Rs 90,000 / Piece(s) 

    Tubular Feeder offered can be made available in different finish configurations and find application to draw out bulk materials/powders from silos of hoppers. Further, these can effectively perform dosing functions such as weighers, conveyor belts, feeding of big-bags and others. Some of its features include used for load preparation/in continuous feeding operations; sheet steel based tubes which makes these resistant to wear, corrosion, acids; complete sealing finish of conveying tube; allows for conveying under pressure/vacuum conditions; can be provided with fit amplitude sensors.

    Flip Flop Vibratory Screen

    Approx Price: Rs 1.2 Lakh / Piece(s) 

    Flip Flop Vibratory Screen offered comprise high performance flip-flop vibratory screens that combine two motions for creating dual vibration movement. Providing for highly effective work performance, the equipment is highly effective and is proven to be effective in screening all type of waste material. Some of its features include low maintenance and operating costs; compact and modular construction finish; single or multi deck type options; suitable for use in areas like sand & crushed stone, limestone & dolomite, municipal solid waste, bio-solids and others.

    Vibrating Table

    Approx Price: Rs 45,000 / Set(s) 
    Minimum Order Quantity: 01 Set(s)

    MAGWELL offers a wide range of Vibrating tables. Concrete vibration table consists mainly of platform chassis, vibrator spring components, mesa and chassis. They are used for chemical, food, plastics, pharmaceuticals, metallurgy, glass, building materials, food, fertilizers, abrasives, ceramics and other industries.

    Principle application of a Vibrating Table is to uniformly fill the mould, drive out air bubble and compact the product to achieve superior mould strength and higher surface finish.

    Vibrating Table

     

    MAGWELL offers a wide range of Vibrating tables. Concrete vibration table consists mainly of platform chassis, vibrator spring components, mesa and chassis. They are used for chemical, food, plastics, pharmaceuticals, metallurgy, glass, building materials, food, fertilizers, abrasives, ceramics and other industries.

    Principle application of a Vibrating Table is to uniformly fill the mould, drive out air bubble and compact the product to achieve superior mould strength and higher surface finish.

    WORKING PRINCIPLE:

    Concrete vibration table were welded with steel plate and steel, vibration table is the same motor plus a pair of eccentric composition. And through a pair of pylon coupling installed on mesa (reverse) center position, plays a vibration compaction process smoothly and vertical direction function.

    FEATURES:

    While using the Vibrating Table you can adjust the vibrating motor’s vibrating force to the platform on the material to achieve the desired form.

    • Good sealing performance, no dust overflow
    • Continuous production, single or multi-layer, auto-classification filtering
    • Energy-saving and low noise with vibration motor
    • Start fast and stop smoothly
    • Simple installation, easy operation and maintenance
    • High power, large platform; maximum power of 7.5kw, exciting force 80KN, sand box can carry the weight of 8T
    • Table height adjustable, suitable for assembly line use three-dimensional vibration, complex cavity for casting
    • Variable, modeling process, without damage of the premise, for best compaction results
    • Since the locking function, the production line to ensure accurate positioning
    APPLICATIONS:

    It is suitable for any dry material screening from 0.74mm-5mm., the largest particle size is 10mm.It is widely used in chemical, food, plastics, pharmaceuticals, metallurgy, glass, building materials, food, fertilizers, abrasives, ceramics and other industries.

    • Food industry: sugar, salt, alkali, gourmet powder, starch, milk powder, yeast powder, pollen, food additive, bean milk, juice, etc.
    • Abrasive material and ceramic industry: building sand, mica, alumina, abrasive, refractory material, slurry, etc.
    • Chemical industry: resin pigment, medicine, grease, paint, palette, etc.
    • Paper-making industry: coated slurry, exhaust liquid, paper making liquid and waste water reclamation, etc.
    • Metallurgy and mining industry: quartz sand, ore, titanium oxide, zinc oxide, etc.
    • Mechanical industry: casting sand, powder metallurgy, electromagnetic material and metal powder, etc

    Vibratory Furnace Charger - Consists

    Approx Price: Rs 85,000 / Piece(s) 
    Minimum Order Quantity: 01 Piece(s)
    Vibratory Furnace Charging Unit

    Vibratory Furnace Charger consists of a vibrating feeder mounted on a moving trolley with a storage hopper mounted above the feeder. Our company make vibratory furnace chargers basically comprise of the following parts. Vibrating Feeder is suitable for delivering required capacity, storing hopper of required capacity, moving carriage with driving arrangement. Control panel for operating the system. Cable reeling Drum / Cable Drag Chain.

    The metallic components like scrap, bales, pig iron and foundry retains are stored in the hopper. The hopper shape is specially designed to enable bulky and irregular scrap pieces to be extracted without problem.

    Vibrating furnace charger is effective solutions to problems such as high labor cost, hazards operators faced in foundries, melting shops etc. Such a kind of automation allows foundry men to work at a safe distance thus preventing injuries arising out of molten metal splash. It also facilitates in rapid and quick charging of the furnace thereby allowing maximum utilization of the furnace, in addition to this, the damage to furnace lining is avoided which normally occurs in manual charging of the furnaces.

    Looking for Vibrating Equipment ?
    © Magwell Industries
     
    Desktop Site Back to top